netGetAPParam will read out the parameters for a wireless network previously set from the RTCU M2M Studio or by the netSetAPParam function.
The format of an IP address is the same as returned by the sockGetLocalIP function.
Output:
SSID : STRING
The SSID of the wireless network.
Security : INT
The type of security used by the wireless network. Use the netGetAPSecurity function to get the security configuration.
Country : STRING
The country code where the device operates.
The ISO 3166-1 standard is used for the country code, as f.ex. 'DK' for Denmark.
Address : DINT
The IP address of the device.
Subnet : DINT
The Subnet mask of the device.
Hidden : BOOL
Whether the SSID is broadcast.
Chnl : SINT
The channel used for communication.
Declaration:
FUNCTION_BLOCK netGetAPParam;
VAR_OUTPUT
SSID : STRING;
Security : INT;
Country : STRING;
Address : DINT;
Subnet : DINT;
Hidden : BOOL;
Chnl : SINT;
END_VAR;
Example:
INCLUDE rtcu.inc
VAR
wpa_psk : netWLANSecurityWPA;
net : netGetAPParam;
END_VAR;
FUNCTION ap_set;
VAR
rc : INT;
END_VAR;
wpa_psk.phrase := "passphrase";
rc := netSetAPParam(
ssid := "SSID"
,hidden := FALSE
,chnl := 1
,sec_config := ADDR(wpa_psk)
,Address := sockIPFromName(str := "192.168.1.1")
,Subnet := sockIPFromName(str := "255.255.255.0")
);
DebugFmt(message := "netSetAPParam= \1", v1 := rc);
END_FUNCTION;
FUNCTION ap_show;
net();
DebugMsg(message := " SSID= " + net.ssid);
IF net.security = 0 THEN
DebugMsg(message := " Security= None");
ELSIF net.security = 1 THEN
DebugFmt(message := " Security= WPA/WPA2 PSK");
netGetAPSecurity(sec_config := ADDR(wpa_psk));
DebugMsg(message := " phrase= " + wpa_psk.phrase);
ELSE
DebugFmt(message := " Security= Unknown (\1)", v1 := net.security);
END_IF;
DebugMsg(message := " Network= IPv4");
DebugMsg(message := " Address= " + sockIPToName(ip := net.Address));
DebugMsg(message := " Subnet= " + sockIPToName(ip := net.Subnet));
END_FUNCTION;
PROGRAM example;
ap_set();
ap_show();
BEGIN
END;
END_PROGRAM;
| 
